Product Category: Loaders / Skidsteers / Excavators / Backhoes / Trenchers

S175 Spec

Fuel Tank: 24 gal Rated Operating Capacity (SAE): 1500 lbs Operating Weight: 5662 lbs Tipping Load: 3000 lbs Travel Speed: 7.3 mph Pump Capacity: 16.9 GPM Length with Standard Bucket: 130.3 in Width (with bucket): 68 in Height: 76.3 in Height to Bucket Hinge Pin: 114.5 in Engine Make: Kubota Engine Model: V2203-M-DI Engine Fuel: Diesel Engine Cooling: Liquid Number of Cylinders: 4 Horsepower (SAE NET): 46 HP

The compact Bobcat S70 skid-steer loader is small enough to get in the tight spots, yet tough enough to get you out. This agile little workhorse is only 6 feet tall and 3 feet wide — the ideal size for scooting through narrow doorways, corridors, aisles, alleys and gates, and for working under low ceilings. It’s the perfect loader whenever the job is too big for a shovel or the space is too small for a larger machine — in backyards, barns, construction sites and demolition areas. With more than 20 Bobcat attachments to choose from, the S70 is a multi-attachment carrier that’s ready to take on just about any job.

S 70 Specs

• Operating Weight: 2795 lbs
• Fuel Tank: 6.5 gal
• Engine Fuel: Diesel
• Horsepower: 23.5 HP
• Rated Operating Capacity (SAE): 700 lbs
• Tipping Load: 1512 lbs
• Operating Weight: 2795 lbs
• Travel Speed: 6.1 mph
• Length: 75.8 in
• Length without Attachment: 75.8 in
• Length with Standard Bucket: 97.3 in
• Width: 44 in
• Width (with bucket): 44 in
• Height: 71.4 in
• Height with Operator Cab: 71.4 in
• Height to Bucket Hinge Pin: 94.5 in
• Reach @ Maximum Height: 15.8 in
• Turning Radius: 58.7 in
• Wheelbase: 28.4 in
• Auxiliary Std Flow: 9.8 GPM
• Backup Alarm: std
• BICS System (Interlock): std
• Operating Lights: std
• Auxiliary Hydraulics: std
• Bob-Tach Attachment System: std
• Horn: std
• Engine Cooling: Liquid
• Emissions Tier (EPA): Final Tier 4

S150 Spec

Fuel Tank: 15.5 gal

Rated Operating Capacity (SAE): 1500 lbs Operating Weight: 6505 lbs Tipping Load: 3100 lbs Travel Speed: 7.6 mph Pump Capacity: 18.0 GPM Length with Standard Bucket: 127.3 in Height: 79.8 in Height to Bucket Hinge Pin: 110.9 in Engine Make: CAT Engine Model: CAT 2.2 CRDI Engine Fuel: Diesel Engine Cooling: Liquid Horsepower (SAE NET): 65.8 HP

Standard Full-Size Skid Steer Bucket Mount (S-150; T-180; Type size & mount); WE DO NOT HAVE THE ADAPTER TO PIN IT ONTO ANY MINI-X. Operating Weight 736 lbs Impact Energy 300 ft lbs Blows per minute 1310 Flow Range Low 7.9 GPM Tools Diameter 2.56 in S160, 425, T140, S205, S130, S150, 425 , 430 Fast Track, 331E, 430, 430 , T190, S175, S130, S185, sc22 bit

239D Spec

Fuel Tank: 15.1 gal Rated Operating Capacity (35% Of Tip): 1435 lbs Operating Weight: 7289 lbs Operating Capacity (50% of Tip): 2050 lbs Tipping Load: 4100 lbs Travel Speed: 7 mph (11.4 kmh) Pump Capacity: 16.3 GPM (61.7 L/min) Auxiliary High Flow: 26 GPM Length with Standard Bucket: 127.3 in Width (with bucket): 69 in Height: 80.1 in in Height to Bucket Hinge Pin: 111.2 in Engine Make: Cat C2.2 CRDI Engine Fuel: Diesel Engine Cooling: Liquid Number of Cylinders: 4 Horsepower (SAE NET): 67.1 HP

• Grade, level and scarify in close quarters. Break up lumpy soil and pick up rocks as small as 3/4 inch. Use it for ground preparation, for seeding, sodding, and lawn leveling-one pass coverage.
• Picks up rocks down to 3/4 in. (19 mm) and larger, and most 1/2″ rocks.
• Hydraulic cylinder opens top cover – for easier dumping, and also allows the bucket and cutting edge to be used to push and scrape debris.
• Rake bars provide better leveling by providing longer ground contact.
• Hardened teeth for longer wear.
• Side skis, which are adjustable, provide depth control and leave only a slight “knife-edge” mark in the finished surface.

Compatible Loaders: A300, S130, S150, S160, S175, S185, S205, S220, S250, S300, T180, T190, T250, and T300

Compatible Loader Backhoes: B100B and B250B 

6 ft with wings power angle blade

Spec Sheet (PDF)

U17 Spec

Fuel Capacity 5.2 Gal Weight 3814# Diesel track mach.17 hp Will Dig deep. 7′ 7″ (91 inches} We have 1 13″ and 1 20″ bucket ground pressure 3.8 psi boom swing: left 65 degees; right 58 degrees max dump height 96″ 8′ WIDTH—39>>> 49 inches HEIGHT— 92″ 7’8″ max digging radius at ground level 151 inches 12’7″ max dig depth 91″ — 7’7″

KX91 Spec

Fuel Capacity 13.2 Gal Weight 7330# Desiel track mach.29.6 hp Will Dig 10.5 deep.(125.39 inches} We have 1-24″ & 1-13″ bucket. Machine uses PIN ON X-CHANGE Bucket Mounting System ground pressure 4.596 psi boom swing: left 80 degees; right 50 degrees WIDTH—61.02″ 5’1″ max dump height 139″ 11’7″ HEIGHT—96.06″ 8′ max digging radius at ground level 202″ 16’10” bucket digging force 8059 lbf

Fuel Diesel 12.4 gal                                                            Enclosed Cab with Heat and AC

Hp 24.8                                                                                 ISO pattern or SAE backhoe patttten

Operating Weight 7978#                                                   Buckets 12″ or 24″

Digging Depth 10’6″ Boom Extended 13′

Hydraulic Angle Blade

B26 Spec

Diesel Tank 8.2 Gallon Weight 4001# 16″ backhoe bucket. Will dig 7’6″. Front bucket 60″ wide 26 hp diesel engine. () 90″ 7’6″ High 54 4’6″ Wide Backhoe Reach 133″ Front Bucket Dump Height 94″ 7’8″ Rear Bucket Dump Height 89″ 7’4″ Transport Length 201.9″ 16.8′ Loader Bucket Capacity 0.35 Cubic Yard Backhoe Bucket Capacity 1.85 Cubic Feet Hoe # BT820 Machine # B26 Bucket # TL500

Dingo TX 1000 Specs (PDF)

SK800 Spec