fbpx

Header Hours

Hours
Mon - Fri: 7:30am - 6pm
Sat: 8am - 5pm
Sun: Returns ONLY 9:30am - 10am

Sun: Rentals 10am - 2pm

 

<< Return to Home

 

Product Category: Equipment

Search:
View Rental FAQs
 

Log Splitter

Rates:

Per Day: $86.00
4 Hours: $61.00

23214STX38EFI_23214-d-jpg.jpg

Stump Grinder Track Drive Toro STX 38 hp

Rates:

Per Day: $279.00
4 Hours: $236.00

 
Additional Details / Photos

ENGINE            Kohler EVC980 38hp 4-cycle gasoline  air cooled

Hydraulics      Dual hydrostatic traction drive-16 cc hydropumps with15 gpm max flow  to each side; 20 gpm gear pump flow to the,                            piston motor driving the cutter head

Wheel                   21.6″ diameter to tooth; 1″ thick; 16 Greenteeth cutting teeth

Cutter Depth      18″ below grade

Cutter height     35″ above grade

Head Swing       52″ radius x 60° sweep arc

Dimensions       34″ W x 95″ L x51″ H

Weight                  1750 lb

Max Travel Speed   4.5 mph

Stump Grinder 13hp

Rates:

Per Day: $140.00
4 Hours: $95.00

 
Additional Details / Photos

The HAWK was designed to offer an alternative to large, cumbersome, intimidating stump grinders. The HAWK successfully combines a comfortable size with the ability to tackle tough stump grinding jobs. The ergonomic positioning of the handle and the dual handlebars allow the HAWK’s operator to grind any stump diameter from a height of 24” to 16” below grade . . . all in a stump grinder that’s just 30-1/2” wide and weighs in at 320 pounds. The feature-rich HAWK has also been designed with operator safety in mind. While good sense and caution are always essential, the HAWK offers several built-in safeguards to help ensure the safety of the operator.

Stump Grinder Track Drive

Rates:

Per Day: $236.00
4 Hours: $187.00

 
Additional Details / Photos

TORO TRACK Hydraulic Stump Grinder – Known as the “STX26”, this machine is America’s favorite stump cutter.

  • Easy-to-use controls
  • Fits easily through standard 36″ (91 cm) gates
  • Track drive increases hill-side stability
  • Toro exclusive traction control system similar to Dingo TX and TRX trenchers

Specifications:

  • Cutting Depth 12.5″ below grade
  • Cutting Height 35″ above grade
  • Cutting Wheel 19″ diameter to tooth; 3/4″ thick, 12 green teeth
  • Dimensions 34″ W x 78″ L x 48″ H
  • Engine Kawasaki 730V Twin Cylinder 
  • Head Swing 47″ Arc
  • Hydraulic Flow13.5 gpm hydraulic flow to head
  • Weight 1200 lbs.

Dehumidifier

Rates:

Per Day: $32.00

 
Additional Details / Photos

Features:

  • Simplicity of operation. Standard 115 v. plugs in anywhere.
  • Rugged wheels and integral handle for mobility.
  • Automatic pump-out (20′ vertical lift, 100′ + horizontal)
  • Pump Purge Switch
  • Extra long power cord.
  • Heavy duty steel chassis. Powder coated for durability. 
  • Ebac’s “HOT GAS” defrosting feature which automatically eliminates frost build-up providing effective operation at low ambient temperatures.
  • Ebac’s new 5 year warranty.

TRITON

  • Compressor: High Efficiency Rotary
  • BTU/HR: 5,600
  • Refrigerant: R-22
  • CFM: 282
  • Volts: 115
  • Running Amps: 2.5
  • Capacity: 51 ppd@AHAM (80F 60%RH), 13 Gallons at Saturation
  • Height: 29″, Width: 20″, Depth: 16″

Performance:

The Ebac Triton Dehumidifier is a rugged, yet mobile piece of equipment that will operate under extreme conditions and pull large amounts of moisture from the air.

Whenever there is a need for fast, dependable, energy-efficient drying, Ebac can provide the answer.

If you would like more information regarding this product, please complete the following form. An authorized representative will contact you to answer any questions.

Specification

11393GR-US

Units

Height

44

inches

Width

19.5

inches

Depth

15.5

inches

Weight

75

lbs

Voltage

115

V

Phase

1

Frequency

60

Hz

Power

253

watts

Current

2.2

A

Airflow

282

cfm

Refrigerant

R22

 

Typical Extraction (27ºC60%RH)

52

pints/day

Features

11393GR-US

Units

ON/OFF Control

Y

 

Carrying Handle

Y

 

Trolley

Y

 

Electronic Defrost Timer

Y

 

Hot Gas Defrost

Y

 

Large Dia Wheels

Y

 

Min Temp

37

ºF

Max Temp

95

ºF

Temperature Sensitive Defrost

Y

 

Moulded Mains Plug

Y

 

Stoved Epoxy Finish

Y

 

Washable Filter

Y

 

Internal Condensate Pump

Y

 

Small Dehumidifier

Rates:

Per Day: $23.00

Heat Gun 110v

Rates:

Per Day: $11.00
4 Hours: $7.00

Tiller 5hp Front Tine

Rates:

Per Day: $58.00
4 Hours: $45.00

Tiller 5hp Rear Tine

Rates:

Per Day: $81.00
4 Hours: $69.00

Tiller Small 4.5hp Front Tine

Rates:

Per Day: $58.00
4 Hours: $45.00

Tiller Yard Boss Cultivator

Rates:

Per Day: $50.00
4 Hours: $38.00

 
Additional Details / Photos

Comes with Premixed Fuel  (ONLY USE THE FUEL THAT WE GIVE YOU)

TQ Wrench 250# Click

Rates:

Per Day: $32.00

Traffic Cones Orange 28″ 7# ea.

Rates:

Per Day: $1.00

Transit Builder w/Tri Pod & Stick

Rates:

Per Day: $37.00
4 Hours: $27.00

Trencher 18″

Rates:

Per Day: $153.00
4 Hours: $109.00

Trencher Track 36″ 6″ wide

Rates:

Per Day: $250.00
4 Hours: $187.00

Trencher 48″

Rates:

Per Day: $281.00
4 Hours: $217.00

 
Additional Details / Photos

Powerful hydrostatic trenching in a compact package. The Vermeer RT200 is the total solution for small contractors, rental operations, electrical contractors, cable and telephone installers and irrigation professionals. With durable steel shielding, a cost-efficient reversible boom, an operator-presence system, easy-to-learn and color-coded controls, and park brake, the RT200 is the answer to your walk-behind trenching projects.

Basic Unit Specs

  • Weight – Base Tractor 1300 lbs
  • Length – Base Tractor 79 “
  • Engine 1
  • Model & Make Kohler Command CH-23
  • Fuel Type Gasoline
  • Horsepower (gross) 23 hp
  • Displacement 41.1 cu-in
  • Number of Cylinders 2
  • Cooling Medium Air
  • Maximum operating angle 25 deg
  • Fuel Tank 5 gal
  • Engine Oil w/ Filter 2 qt
  • Hydraulic Tank 8 gal
  • Hydraulic System .5 gal
  • Ground Drive Type Hydrostatic
  • Steering Type Two Wheel – Hydraulic
  • Outside Turning Diameter 30 ‘
  • Maximum Turning Angle 23 deg
  • Trencher Chain Speed 512 ft/min
  • Chain Tensile Strength 34000 lbs
  • Auger Type Single
  • Auger Size 18″ OD
  • Drive Type Hydrostatic

Power Cord 10/3 50′

Rates:

Per Day: $9.00

Power Cord 10/3 100′

Rates:

Per Day: $12.00

Wall Paper Perforator

Rates:

Per Day: $4.00
4 Hours: $3.00

We add new items weekly. Please call us if you don't see what you need! - Prices are subject to change without notice. - All charges are for time out, used or not. Please make your selections carefully.