fbpx

Header Hours

Hours
Mon - Fri: 7:30am - 6:00pm
Sat: 8:00am - 3:00pm
Sun: 10:00am - 2:00pm

 

<< Return to Home

 

Product Category: Tree Cutting / Chipping / Splitting / Stump Grinding

Search:
View Rental FAQs
 

Dingo Brush Grapple

Rates:

Per Day: $120.00

 
Additional Details / Photos

Morbark 12″ Chipper Gas (Pintle Hitch and Electric Brakes Only)

Rates:

Per Day: $419.00
4 Hours: $326.40

 
Additional Details / Photos

24-1/2-gallon lockable fuel tank with drain plug and sight gauge machine weight 5100lbs

PSI 2.4L, 75-HP gasoline engine with Morbark ZeroClutch (centrifugal) in lieu of standard Tube and support pad to mechanically raise and lower feed wheel using the drawbar jack Swivel discharge chute with 360° rotation and adjustable flipper end to deflect chips 8.2#, 6″ channel frame with cross bracing for additional structural rigidity 5″ x 3″ tubular steel telescoping drawbar with (2) 12″ extensions, adjustable hitch plate with 2-1/2″ pintle ring and 3/8″ thick safety chains with clasp hooks 7,000# Torsion axle, electric brakes, break-away actuator with 235/80R x 16″ radial tires and hexagon splash

• 21-3/8” diameter x 14-1/2″ wide staggered knife pocket drum with two (2) dual-edged chipper knives and dual sided chambered air impeller system

17-gallon lockable hydraulic reservoir with sight gauge, drain plug and clean-out cover Live hydraulics; ball valve, pump, motor and control valve

Chain Saw 20″ Gas

Rates:

Per Day: $82.00
4 Hours: $66.00

 
Additional Details / Photos

Comes with Premixed Fuel and Bar oil (ONLY USE THE FUEL THAT WE GIVE YOU)

Grapple Branch Manager 53″ Bypass Mini Grapple

Rates:

Per Day: $112.00
4 Hours: $94.90

 
Additional Details / Photos

Pole Saw

Rates:

Per Day: $85.00
4 Hours: $69.80

 
Additional Details / Photos

Comes with Premixed Fuel and Bar oil (ONLY USE THE FUEL THAT WE GIVE YOU)

 

HT 131 Specifications
DISPLACEMENT 36.3 cc (2.2 cu. in.)
ENGINE POWER 1.4 kW (1.9 bhp)
WEIGHT 7.8 kg (17.2 lbs.) w/o cutting attachment
OVERALL LENGTH 7’6″ to 11’6″
FUEL CAPACITY 530 cc (18.0 oz.)
CHAIN OIL CAPACITY 220 cc (7.4 oz.)
OILOMATIC ® Chain/Guide Bar Size 3/8″ PMM3 / 30 cm (12 in. Bar)
POWER SOURCE Gas

 

 

Log Splitter

$800.00

 
Additional Details / Photos

26 Ton Splitter

2″ ball

5.5 HP  Honda Motor

23214STX38EFI_23214-d-jpg.jpg

Stump Grinder Track Drive Toro STX 38 hp

Rates:

Per Day: $325.00
4 Hours: $273.40

 
Additional Details / Photos

ENGINE            Kohler EVC980 38hp 4-cycle gasoline  air cooled

Hydraulics      Dual hydrostatic traction drive-16 cc hydropumps with15 gpm max flow  to each side; 20 gpm gear pump flow to the,                            piston motor driving the cutter head

Wheel                   21.6″ diameter to tooth; 1″ thick; 16 Greenteeth cutting teeth

Cutter Depth      18″ below grade

Cutter height     35″ above grade

Head Swing       52″ radius x 60° sweep arc

Dimensions       34″ W x 95″ L x51″ H

Weight                  1750 lb

Max Travel Speed   4.5 mph

Stump Grinder 13hp

Rates:

Per Day: $166.00
4 Hours: $113.50

 
Additional Details / Photos

The HAWK was designed to offer an alternative to large, cumbersome, intimidating stump grinders. The HAWK successfully combines a comfortable size with the ability to tackle tough stump grinding jobs. The ergonomic positioning of the handle and the dual handlebars allow the HAWK’s operator to grind any stump diameter from a height of 24” to 16” below grade . . . all in a stump grinder that’s just 30-1/2” wide and weighs in at 320 pounds. The feature-rich HAWK has also been designed with operator safety in mind. While good sense and caution are always essential, the HAWK offers several built-in safeguards to help ensure the safety of the operator.

Stump Grinder Track Drive

Rates:

Per Day: $274.00
4 Hours: $219.50

 
Additional Details / Photos

TORO TRACK Hydraulic Stump Grinder – Known as the “STX26”, this machine is America’s favorite stump cutter.

  • Easy-to-use controls
  • Fits easily through standard 36″ (91 cm) gates
  • Track drive increases hill-side stability
  • Toro exclusive traction control system similar to Dingo TX and TRX trenchers

Specifications:

  • Cutting Depth 12.5″ below grade
  • Cutting Height 35″ above grade
  • Cutting Wheel 19″ diameter to tooth; 3/4″ thick, 12 green teeth
  • Dimensions 34″ W x 78″ L x 48″ H
  • Engine Kawasaki 730V Twin Cylinder 
  • Head Swing 47″ Arc
  • Hydraulic Flow13.5 gpm hydraulic flow to head
  • Weight 1200 lbs.

Stump Grinder Trailer Toro

Rates:

Per Day: $32.00

Rayco Chipper Hydraulic Feed 6″

Rates:

Per Day: $265.00
4 Hours: $185.10

 
Additional Details / Photos
General Data U.S  
     
Weight – RC6D35 1,740 lb  
Length Feed Table Up 103.5”  
Length Feed Table Down Tounge Extended 127.5”  
Width 63”  
Maximum Height 93”  
Engine – RC6D35 35 hp Vanguard  
Fuel Used Gasoline 5 gal Tank
Chipping Capacity 6” Diameter  
In-Feed Opening 6” x 6”  
     

We add new items weekly. Please call us if you don't see what you need! - Prices are subject to change without notice. - All charges are for time out, used or not. Please make your selections carefully.